Dan (N7XDL) recently gave a presentation on different antenna types. His slide deck is now on the Radio and Other Resources page or can be directly downloaded here.
Monthly Archives: August 2019
NO MEETING on 8 AUGUST 2019
We will not be having a meeting on 8 August 2019 because of the Rocky Mountain Hamfest in Ogden.
Build a Tape Measure YAGI
Steve (KG7GIT) and Adele (KG7GIS) built a Tape Measure YAGI using instructions found on https://www.youtube.com/watch?v=BmHoQrDfw-0. We'll be building these antennas in the club meeting on August 29th, so get your parts together. You'll need a ten foot section of 3/4 inch Schedule 40 PVC pipe, one 3/4 inch tee, two 3/4 inch four-way tees, one 25 foot by 1 inch tape measure (the antenna doesn't take the whole 25 feet, so there will probably be some people with extra left over), one 5 inch length of 14 AWG wire (again, someone will probably bring a spool, so there should be plenty), electrical tape, soldering flux and solder, and one six foot length of RG58/U coax with a BNC or PL-259 connector on one end.
Murray Safety Fair
Monday, 5 August 2019, at Murray Park (next to the Park Center) will be the Murray City Safety Fair. MARC will have a booth where people can "Get On The Air" (GOTA) and learn about how MARC uses amateur radio to help the city with emergency communications. We will have several club members wandering around the grounds with their HTs so people can have a chance to talk to someone on the radio!